TPYL2600 stenter setting machine

Product use

It is suitable for soaking, stretching, drying and shaping of silk, cotton, wool, hemp, chemical weaving, needle woven fabrics, etc.

technical parameter

·Form: hot air circulation. Single floor horizontal

·Car type: left and right

·Nominal width (mm):

2200. 2400. 2600. 2800. three thousand

·Amplitude modulation range (mm)

700-2000; 700-2200: 700-2400

700-2600; 700-2800

·Nominal speed: 60m/min (speed range 5-60m/min)

·Overfeed rate range: lo% -} 30% (when the nominal speed is 60rn/min, the upper overfeed rate can reach +90%)

·Drying room temperature: 100-220 ℃

·Heat source: heat carrying oil, natural gas / gas, steam

·Cloth holding form: needle clip, cloth clip, needle cloth clip

Cloth dropping form: single swing or swing and roll cloth dropping

Edge detection form: high precision infrared edge detection

Guide rail type: oil lubricated cast iron guide rail

Number of drying room sections: 4-10 sections, each 3M long

technological process

Flat feed → thread widening → infrared centering → lower overfeed → mechanical weft trimming → thread widening → upper overfeed → edge stripping → upper needle or clip (sizing) → stretching or hot setting → cold

Wind cooling → edge cutting, edge suction → needle or clip removal → cold water roller cooling (not used for knitted fabrics) → pendulum dropping or coiling